Depending on how handy you are with home improvements there are a variety of DIY home energy improvements you can implement.
Hot Water Savings
- Fix leaky faucets by replacing worn-out washers and tightening valves.
- Install high efficiency kitchen and bathroom tap aerators and water-saving showerheads.
Lighting Upgrades
- Where possible, upgrade your lights to ENERGY STAR® LEDs that provide long-lasting energy savings. A great place to start is replacing the most frequently frequently used lights in your home.
- Use motion sensors for outdoor lights.
- Invest in lighting controls that have dimmers or timers.
Draftproofing
- See the FAQ, “Where to I start to reduce drafts and improve my home?“
Heating and Cooling
- Follow manufacture recommendations for changing or cleaning furnace filters.
- Maintain your fireplace by closing the damper tightly when not in use. If you no longer use your fireplace, fill the chimney with insulation and tightly seal the damper with weatherstripping.
- Check your heating duct system regularly for visible leaks in common leakage sites such as the heating unit, floor joists, duct connections and space around air registers and grilles. Surface leaks can be sealed with duct mastic or foil tape and once sealed, insulation can be installed.
- Install programmable/smart thermostats that can be programmed to appropriate temperatures.
- Cover bare floors with rugs for warmer feet, especially with floors that have insufficient insulation.
- If your home heats up too much in the summer, consider installing an ENERGY STAR ceiling fan with summer mode (spins counter-clockwise) to create a wind chill effect and move air downwards.
- Ensure that your attic is well-ventilated so that hot air can escape during the summer months and keep your home cooler.
Appliances and Electronics
- Use power bars/strips to plug in printers, computers and monitors, DVD players, TVs, game consoles and other electronics. The power strips will switch off power to these devices when they’re not in use or if you’re away from home.
- Ensure that your fridge or freezer door is tightly sealed and replace the gasket or seal when needed.
To find the most energy-efficient models for your home, visit the Natural Resources Canada searchable product list or BC Hydro’s list of energy-efficient products.
Did you see a building science or energy efficiency term you did not understand? Check out our glossary.